RTpS-1KW in position
More on the development and production of RTpS-1KW
RTpS-1KW production facility
ADP-15 diesel generator
Antenna box KA-140
 
 
RTpS-1KW radio-teleprinter system
 

RTpS-1KWRTpS-1KW radio-teleprinter system provided full duplex dual-channel information transmission in the HF frequency range from 2 MHz to 29.9999 MHz. All devices were protected at the system level and enabled reliable operation in all military tactical conditions. The system was modular, easy to maintain, and expandable with modern HF communications techniques such as selective calling, scanning of received signals, adaptive communications, and jamming protection.

Operating modes were voice, Morse code telegraphy, multi-channel teleprinter telegraphy, and data transmission at 2.4 kb/s. Devices were controlled from the front panel of the PB-110 exciter and RP-150 receiver, or via remote controls built into the cabin. Remote control was also possible by extending the system's remote controls to a distance of 50m. With the additionally integrated TTU-4/2 multiplexing device, control could be performed from up to 17 km away via dual-wire field telephone cable PTK-56.
° Functional units, devices and components of the RTpS-1KW set:
Receiver section:
Radio-receiver RP-150 and Preselector PS-160.
Transmitter section:
Exciter PB-110, Linear power amplifier LP-123, Post-selector PS-160, and Mains rectifier MI-132.
Telephone-telegraph unit:
Radio channel control console PURKA, External subscriber control console PUSUČ, teleprinter T-100
(2 units), Telegraph error corrector TgKG-1, Induction telephone M-63 (3 units).
Antenna section:
Broadband transceiver umbrella antenna AT-45, 10m transceiver whip antenna AT-60, Broadband receive antenna AT-37, 6m receive whip antenna AT-26, Active receive antenna AT-61, Antenna box KA-140, Transmit antenna switch KA-0204, Receive antenna switch KSPA-0203, Local antenna switching control device LUKA.
Remote control unit:
Remote control device for exciter DU-190 and Remote control device for receiver DU-191.
Power supply, accessories and installation:
Field vehicle TAM-150BV 5t 6x6, Shelter cabin K-30R, Generator ADP-15, Sine-wave voltage converter PSN, Battery charger PAVK, Distribution cabinets RO-1 and RO-2, Mobile operation box KRUP, and other accessories.
 
 ° Learn more about the RTpS-1KW system and its components by downloading PDF documents:
Dual-channel exciter PB-110
(format PDF - ~270 kB)
Linear power amplifier LP-123
(format PDF - ~200 kB)
Dual-channel receiver RP-150
(format PDF - ~270 kB)
HF Preselector PS-160
(format PDF - ~130 kB)
Antenna box KA-140
(format PDF - ~210 kB)
° Photo gallery of the RTpS-1KW radio-teleprinter system
We thank Mr. M. M. Damnjanović
 
Optimized for:
1024 x 768, XHTML 1.0 Transitional
© Radista, Belgrade, 2005-2012. Web Design BgSajt webmaster: Đole